Hl-618 Type Online Knife Automatic High-speed Splitting Machine
The fully automatic high-speed online cutting and stripping machine is an automatic equipment with horizontal stripping, which further improves the quality and efficiency of stripping. When the board is divided, it can be connected to the connection table of the board machine to realize automatic board placement without manual board placement. The slitted board is transported through the assembly line to greatly save manpower, and fully realize unmanned board separation operation.
Safe, automatic, efficient and labor-saving
• 2. The PLC man-machine exchange interface is adopted, and the microcomputer control program is used to realize the automatic control of the number of cuts and the cutting stroke, thereby saving workers and improving efficiency.
• 3. Fully automatic feeding and cutting of PCB boards, and the computer automatically counts the output at a glance.
• 4. After the PCB board is cut, it can be directly extended to the inspection line through the conveyor belt (or directly to the receiving board machine) to avoid the worker's secondary operation.
• 5. The equipment is set as a unidirectional sub-board, the whole machine is controlled by Mitsubishi PLC plus Weilun touch screen, and the operation interface is simple and convenient.
• 6. The incoming board can be directly connected to the assembly line or the board feeding machine, and there is no need for manual board placement and electric eye protection to ensure safe production.
• 7. It can quickly replace PCB products of different sizes. To replace products, you only need to call the program, and the PLC data storage can reach more than 50 groups.
• 8. The track of the conversion product is automatically adjusted, and the width of the cutter can be set by the program.
• 9. Appearance size: L1250mm*W 900*H1850mm (Note: The actual size shall prevail)
• 10. Height of feeding guide rail: 900±20mm, height of foot cup can be adjusted
Technical parameter 1:
|HL-618 type online knife automatic high-speed splitting machine
|Clean and dry, avoid humidity and heat
|Greater than 0.6MP
|Minimum distance from part to cut
|Greater than or equal to 1.5mm
|Maximum and Minimum Board Length Requirements
The length of the PCB board is within 350mm, and the width of the board is within 300mm
(Note: Please let us know if it exceeds the scope, it needs to be customized)
|Maximum height of PCB components
|The height of the parts on the front of the PCB board is limited to within 30mm, and the height of the reverse side is limited to within 20mm
|Touch screen input according to V-slot size
|Can store 50 groups
Technical parameter 1:
|Silver guide screw
|Light grid, sensor and software triple protection
|Part surface treatment
|Power off function
|Start-up time monitoring, equipment failure information and automatic rejection system
|Way of working
If you have any good suggestions and comments on our company, or want to consult our products, please fill in the form below, and we will contact you at the first time!