undefined
undefined
+
  • undefined
  • undefined

HL-6112-type PCB board multi-knife plate machine

Online consultation Online consultation
  • Product Description
  • Detailed introduction
  • Download information
    • Commodity name: HL-6112-type PCB board multi-knife plate machine
    • Commodity ID: 1224283614187507712

    The equipment is used for on-line automatic board splitting, with full capacity of PCB boards with a width of more than 10MM.

    Overall overview
     
    The equipment is used for online automatic board splitting, with full capacity of PCB boards with a width of more than 10MM.
    • The machine can be changed quickly;
    The electrical control part can be realized in the man-machine interface selection, easy to open or shield;
    There is a man-machine interface, and the table is in the form of light curtain and acrylic cover to ensure safety.
    • Overall floor structure
    The automatic line equipment frame adopts square welding frame, sheet metal sealing plate, and surface baking steel paint;
    • Equipment work table with 45# steel plate or A3 steel plate, the surface of nickel plating;
    Overall dimensions of the equipment: length 800 * width 650 * height 1000 (the distance from the light bar board to the ground is 900MM). The specific dimensions are made according to your company's requirements.
    • Indoor temperature
    • Air humidity
    • Ambient noise
    • Vibration speed
    The bottom of the equipment is equipped with casters with adjustable foot cups, which is convenient for the equipment to move and needs to be stably fixed when not moving. The adjustable height of the foot cup is more than 50MM;
    Equipped with MES interface for communication and linkage with other equipment, network interface shall be reserved for subsequent factory intranet;
    • Equipment using power supply: AC220V gas source: 4-6KGF/cm2
    • Necessary safety protection devices;
    • The equipment shall operate smoothly and have necessary detection elements;
    According to the normal production capacity, it needs to reach more than 1500 PCS/H (required at the time of final acceptance)
    Data monitoring and statistical output are required: startup time monitoring, capacity monitoring, equipment failure information and automatic rejection system, etc. (man-machine interface and content need to be specifically discussed)
    Multiple sets of upper and lower knives are used for simultaneous division
    The distance between the upper and lower knives can be accurately adjusted, and the thickness of the sub-plate shall meet the following requirements: 0.6MM-4.0MM
    • Sub-board width: up to 300mm (size can be customized)
    Multiple sets of upper and lower knives are used for simultaneous division
    The bottom of the equipment is equipped with casters with adjustable foot cups, which is convenient for the equipment to move and needs to be stably fixed when not moving. The adjustable height of the foot cup is more than 50MM;
    Equipped with SMEMA interface for communication and linkage with other equipment, network interface shall be reserved for subsequent factory intranet;
    • Equipment using power supply: AC220V gas source: 4-6KGF/cm2
    • Necessary safety protection devices;
    • The equipment shall operate smoothly and have necessary detection elements;
    According to the normal production capacity, it needs to reach more than 1500 PCS/H (required at the time of final acceptance)
    Data monitoring and statistical output are required: startup time monitoring, capacity monitoring, equipment failure information and automatic rejection system, etc. (man-machine interface and content need to be specifically discussed)
    Multiple sets of upper and lower knives are used for simultaneous division
    The distance between the upper and lower knives can be accurately adjusted, the thickness of the sub-plate needs to meet: 0.6MM-3.5MM The distance between the upper and lower knives can be accurately adjusted, and the thickness of the sub-plate needs to meet: 0.6MM-3.5MM
    The gap between the upper knife and the lower knife can be adjusted according to the V-CUT spacing of the PCB board, and the precision is controlled at 0.1MM
    • The spacing between two adjacent sets of blades can be adjusted between 10MM-25MM, which can quickly complete the adjustment of the required width;
    • Circuit board material: aluminum substrate, copper substrate, FR4, glass fiber board;
    • The speed of the conveyor line can be adjusted;
    • The product pick-and-place mechanism can be adjusted according to the width of the product;
     
     
    List of main components

     

    Component Name

    Dosage

    Brand

    Remarks

    PLC

    1PCS

    Delta

    Warranty for 12 months

    Touch screen

    1PCS

    Delta

    Warranty for 12 months

    Pneumatic components

    number

    SMC, Yadke

    Warranty for 12 months

    Bearing

    number

    NSK

    Warranty for 12 months

    Linear guide, screw

    number

    upper silver

    Warranty for 12 months

    Cutter

    number

    Imported high speed steel material

    Warranty for 12 months

     

    pic

     

    pic

     

     

    Video Show

     

     

     

    Key words:
    • HL-6112型PCB板多刀分板机

Recommended Products

HL-500 type MOS tube forming and shearing machine

More

HL-500 type MOS tube forming and shearing machine

HL-388-A type single tube crystal forming machine

More

HL-388-A type single tube crystal forming machine

HL-387 Bridge Stack (IGBT) Forming Machine

More

HL-387 Bridge Stack (IGBT) Forming Machine

HL-219 type crystal forming machine

More

HL-219 type crystal forming machine

HL-388-C Type Multi-tube Crystal Forming Foot Cutting Machine

More

HL-388-C Type Multi-tube Crystal Forming Foot Cutting Machine

HL-101MB resistance and diode automatic molding machine

More

HL-101MB resistance and diode automatic molding machine

Product Message

If you want to inquire about our products, please fill in the form below and we will reply to you as soon as possible.

Submit