Maintenance

Maintenance of automatic locking screw machine

Any mechanical equipment needs maintenance, automatic locking screw machine is no exception. Simple introduction of automatic lock screw machine daily maintenance of 9 aspects.

1. daily maintenance method
1. Keep ventilated and dry.
2. Clean the screw silo regularly to ensure that the silo is clean. It is recommended to use high-pressure air to blow out the residue in the silo.
3. Clean the nail feeding system regularly to ensure the smooth operation of the nail feeding system. It is recommended to add some grease to the moving part regularly.
4. Clean the screw track regularly to ensure that the screw runs smoothly in the track.
5, keep clean, when not in use, as far as possible the use of oil cloth to wipe, do not touch water.
6, often check, anti-rodent trachea wire, affect the future use due to its intelligent and precise structure, have any use problems or need to repair, please contact the manufacturer 0755-27909809 in time, do not disassemble and assemble.
7, regular plug-in ventilation, check the performance.
8. Regularly clean the outer surface of the chassis.
9. Please turn off the power when not in use.

At the same time, it is also necessary to use screws that meet the relevant standards. The precautions are as follows:

1. The screws used are free of defects such as foreign body clamps, mixing materials, flower heads, etc., otherwise equipment will be jammed;
2. The position of the lock screw should be as uniform as possible to avoid different positions, uneven surface, narrow space, etc;
3, the selection of screws should be commonly used, a large number of types, in order to improve the use of automatic locking screw machine efficiency;
4, the use of automatic locking screw machine on the same product as far as possible to choose the same specifications of the screw.