Machine overview Manually clamp the material on the feeding gear, the servo motor action drives the gear to rotate to perform a foot cutting, the material in-position detection fiber detects the material and the servo motor stops, and the traverse manipulator performs a descending action to start grabbing the material, and the traverse manipulator removes the material. After being sent to the forming and rounding mechanism, start to press the material foot to start rounding, after the rounding is formed, the forming mechanism descends, the pressing foot cylinder returns to discharge, and one cycle is completed; Features of this machine 1: Safe, automatic, efficient and labor-saving 2. The length of the pin is adjustable 3. The center distance of the O-shaped circle is adjustable 4. 1300PCS per hour 5. Suitable for diodes and resistors     Action process     Device parameter one   A Body length 6.5-9.5 B pin length adjustable C O-center distance adjustable D O-shaped center inner diameter 2.5-3.5 E wire diameter 0.6-1.3 F Body diameter 2.3-8     Device parameter two   General parameters Dimensions 600*700*1400mm power supply AC220v Air demand 0.5-0.7MPa Exterior color sky blue motor Matsushita sensor Omron cylinder AirTAC equipment efficiency About 1300PCS/H