HL-FBJ4666 Online Milling Cutter Curve Split Machine

Online consultation Online consultation

Product Description
Detailed introduction
Download information

Commodity name: HL-FBJ4666 Online Milling Cutter Curve Split Machine
Commodity ID: 1224283606381907968

The equipment adopts fully automatic loading and unloading products, which can be directly connected to the wiring body or the upper board machine; Use special fixtures to clamp the product (pcb) to avoid cutting errors caused by poor product placement.

Overview of device functions

1. The equipment adopts fully automatic loading and unloading products, which can be directly connected to the wiring body or the upper board machine;

2. Use special fixture to clamp the product (pcb) to avoid cutting errors caused by poor product placement;

3. The system automatically corrects the installation error to ensure the high precision cutting requirements of the product;

4. Adopt safety door to reduce noise and dust and improve safety;

5. It can directly dock the blanking equipment and carry out sub-tray processing;

6. In the process of cutting the board, if the knife is broken, the equipment has the function of automatic tool change, so there is no need to change the knife by hand;

7. The equipment adopts Mes system, the machine can be controlled anywhere in the factory, and it can be controlled with WIFI function.

8. There is a follow-up dust collection function, and the vacuum cleaner is equipped with a dust collection box (maintenance can be scheduled according to the demand for capacity cutting or dust collection time);

9. Install a static eliminator, divide the electricity and dust removal nozzle to work continuously to eliminate the static electricity generated during high-speed spindle cutting, which can avoid damage to parts due to static electricity and avoid dust accumulation caused by static electricity.

10. Visual interface, unlimited capacity of single program cutting point, dynamic simulation and teaching of cutting path, scanning and editing of the whole board.

11. Dual working platform operation

12. Into the plate flow direction: from left to right or from right to left, can be determined according to customer needs

13. Sub-board counting function

Operation process

Rear outlet plate: equipped with conveyor belt

Software Mark Point Introduction

Main parameters of equipment I

Machine Dimensions	L1750W1100H1850mm
Machine power	3KW
Power	220V/50HZ
Weight	980KG
Vacuum cleaner size	External/L640 * W740 * H1700mm
Vacuum cleaner power	3P
Table size	Double working platform, single table size is 350mm * 320mm
X\Y axis cutting speed	0-100 mm/s adjustable
X, Y, Z axis drive speed	X, Y axis 1000 mm/s(min) Z axis 750 mm/s(min)
X, Y, Z axis drive mode	Matsusune servo motor screw, guide rail
Workbench output mode	Matsusune servo motor screw, guide rail
Machine repeat accuracy	±0.02mm
Manipulator Grasping Mode	vacuum adsorption
Repeated fixed accuracy of manipulator	±0.04mm
PCB feeding track	Width 60-360mm adjustable

Main parameters of equipment II

Working area (machinable stroke)	X:320mm,Y:350mm,Z:50mm
PCBA processing range	320mm*350mm
Belt conveying width of blanking product	420mm
Cutting PCB thickness range	0.3-5mm
milling cutter diameter	0.8-3.0mm
Cutting accuracy	±0.03mm
Cutting function	With the function of cutting straight lines, arcs, circles, L-shaped and U-shaped
Tool Management	Automatic detection of broken knife, sliding knife function
	Automatic tool change system
	Tool wear: intelligently set the number of segments (5 segments)
	The tool life can be controlled according to the PCB board thickness program, and the horse extends the life of the milling cutter
Spindle speed	6000rpm
Dust collection method	Lower dust collection/upper dust collection
Safety device	Use safety doors or sensors
software rights management	Password protection, according to the permission to enter the corresponding operation interface
Programming	Visual interface, unlimited cutting point capacity of a single program, dynamic simulation and teaching of cutting path, scanning and editing of the whole board

Main equipment configuration

Name	Brand	Name	Brand
Guide rail	Taiwan silver	Screw rod	TBI
Servo motor	Panasonic	Track motor	LeSai
CCD	Dahua	industrial computer	HUNTKEY
motion control card	LeSai	Display	Dell
high speed spindle	NSK	photoelectric induction	Panasonic
Pneumatic components	Yadke	Electrical components	Omron
Flexible drag chain cable	Egus.	Vacuum Cleaner	Toray filter element